View B39182B8088P810_8387773.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer band iii series/type: ordering code: b8088 B39182B8088P810 date: version: august 05, 2013 2.4 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 august 05, 2013 b8088 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephone band iii systems n low insertion attenuation n low amplitude ripple n usable passband 75 mhz n single ended to balanced transformation in antenna - rx path n impedance transformation 50 w to 100 w in antenna - rx path n high tx - rx isolation features n package size 2.0 x 1.6 n component height 0.45 mm max. n rohs compatible n approximate weight 0.006 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitive l evel 3 bottom view side view top view 1 2 3 5 6 7 8 4 9 0.43 0.33 0.35 0.29 0.7 0.45 max. 7 5 2 6 1 3 8 4 2.0 1.6 0.29 pin configuration n 1,8 rx output (balanced) n 3 tx input (single ended) n 6 antenna n 2, 4, 5 to be grounded n 7, 9 to be grounded 3 1 8 4,5,9 6 2,7
3 august 05, 2013 b8088 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C20 ?c to +85 ?c ant terminating impedance: z ant =50 w || 3.9nh. rx terminating impedance: z rx = 100 w ( balanced)|| 12nh. tx terminating impedance: z tx =50 w characteristics tx-ant min. typ. @ 25?c max. center frequency f c C 1747.5 C mhz maximum insertion attenuation a max 1714.0 ... 1781.0 mhz 2.0 3.0 db 1710.0 ... 1785.0 mhz 2.5 4.0 db amplitude ripple per 5mhz channel da 1710.0 ... 1785.0 mhz 0.55 1.3 db vswr tx port 1710.0 ... 1785.0 mhz 1.5 2.0 ant port 1710.0 ... 1785.0 mhz 1.5 2.0 attenuation a 10.0 ... 1565.42 mhz 30 33 db 207.5 ... 222.0 mhz 50 62 db 470.0 ... 770.0 mhz 35 40 db 1565.42 ... 1573.374mhz 40 46 db 1573.374... 1577.466mhz 42 47 db 1577.466... 1585.42 mhz 40 44 db 1597.5515...1605.886mhz 35 39 db 1605.886... 1680.0 mhz 20 30 db 1805.0 ... 1880.0 mhz 43 47 db 1920.0 ... 1980.0 mhz 20 33 db 2110.0 ... 2170.0 mhz 27 41 db 2400.0 ... 2500.0 mhz 30 34 db 2620.0 ... 2690.0 mhz 27 31 db 3420.0 ... 3570.0 mhz 20 25 db 5130.0 ... 5355.0 mhz 15 20 db 5725.0 ... 5850.0 mhz 15 20 db
4 august 05, 2013 b8088 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C20 ?c to +85 ?c ant terminating impedance: z ant =50 w || 3.9nh. rx terminating impedance: z rx = 100 w( balanced)|| 12nh. tx terminating impedance: z tx =50 w characteristics ant-rx min. typ. @ 25?c max. center frequency f c C 1842.5 C mhz maximum insertion attenuation a max 1805.0 ... 1880.0 mhz 3.0 4.3 db amplitude ripple per 5mhz channel da 1805.0 ... 1880.0 mhz 0.65 1.7 db common mode rejection ratio 1805.0 ... 1880.0 mhz 23 1) 1) a combination of 10? phase balance and 1 db amplitude balance corresponds to 19.6 db cmrr 25 db vswr rx port 1805.0 ... 1880.0 mhz 1.6 2.0 ant port 1805.0 ... 1880.0 mhz 1.6 2.0 attenuation a 10.0 ... 1710.0 mhz 35 58 db 1710.0 ... 1785.0 mhz 45 54 db 1965.0 ... 2400.0 mhz 15 58 db 2400.0 ... 2484.0 mhz 30 60 db 2484.0 ... 5650.0 mhz 30 52 db imd product level limits 2) at f tx =1747.5mhz, f rx =1842.5mhz 2) imd product level limits for power levels p tx =21dbm (antenna port output power) and p blocker =- 15dbm (antenna port input power) a blocker 1 95.0 mhz -115 dbm blocker 2 1652.5 mhz -114 dbm blocker 3 3590.0 mhz -110 dbm blocker 4 5337.5 mhz -116 dbm
5 august 05, 2013 b8088 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C20 ?c to +85 ?c ant terminating impedance: z ant =50 w || 3.9nh. rx terminating impedance: z rx = 100 w( balanced)|| 12nh. tx terminating impedance: z tx =50 w characteristics tx-rx min. typ. @ 25?c max. differential mode isolation a 1710.0 ... 1785.0 mhz 53 58 db 1805.0 ... 1880.0 mhz 50 53 db common mode isolation 1710.0 ... 1785.0 mhz 50 57 db
6 august 05, 2013 b8088 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = 25 ?c ant terminating impedance: z ant =50 w || 3.9nh. rx terminating impedance: z rx = 100 w ( balanced)|| 12nh. tx terminating impedance: z tx =50 w characteristics tx-ant min. typ. @ 25?c max. center frequency f c C 1747.5 C mhz maximum insertion attenuation a max 1714.0 ... 1781.0 mhz 2.0 2.4 db 1710.0 ... 1785.0 mhz 2.5 2.6 db amplitude ripple per 5mhz channel da 1710.0 ... 1785.0 mhz 0.55 1.3 db vswr tx port 1710.0 ... 1785.0 mhz 1.5 2.0 ant port 1710.0 ... 1785.0 mhz 1.5 2.0 attenuation a 10.0 ... 1565.42 mhz 30 33 db 207.5 ... 222.0 mhz 50 62 db 470.0 ... 770.0 mhz 35 40 db 1565.42 ... 1573.374mhz 40 46 db 1573.374... 1577.466mhz 42 47 db 1577.466... 1585.42 mhz 40 44 db 1597.5515...1605.886mhz 35 39 db 1605.886... 1680.0 mhz 20 30 db 1805.0 ... 1880.0 mhz 43 47 db 1920.0 ... 1980.0 mhz 20 33 db 2110.0 ... 2170.0 mhz 27 41 db 2400.0 ... 2500.0 mhz 30 34 db 2620.0 ... 2690.0 mhz 27 31 db 3420.0 ... 3570.0 mhz 20 25 db 5130.0 ... 5355.0 mhz 15 20 db 5725.0 ... 5850.0 mhz 15 20 db
7 august 05, 2013 b8088 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = 25 ?c ant terminating impedance: z ant =50 w || 3.9nh. rx terminating impedance: z rx = 100 w( balanced)|| 12nh. tx terminating impedance: z tx =50 w characteristics ant-rx min. typ. @ 25?c max. center frequency f c C 1842.5 C mhz maximum insertion attenuation a max 1805.0 ... 1880.0 mhz 3.0 3.3 db amplitude ripple per 5mhz channel da 1805.0 ... 1880.0 mhz 0.65 1.6 db common mode rejection ratio 1805.0 ... 1880.0 mhz 23 1) 1) a combination of 10? phase balance and 1 db amplitude balance corresponds to 19.6 db cmrr 25 db vswr rx port 1805.0 ... 1880.0 mhz 1.6 2.0 ant port 1805.0 ... 1880.0 mhz 1.6 2.0 attenuation a 10.0 ... 1710.0 mhz 35 58 db 1710.0 ... 1785.0 mhz 46 54 db 1965.0 ... 2400.0 mhz 15 58 db 2400.0 ... 2484.0 mhz 30 60 db 2484.0 ... 5650.0 mhz 30 52 db imd product level limits 2) at f tx =1747.5mhz, f rx =1842.5mhz 2) imd product level limits for power levels p tx =21dbm (antenna port output power) and p blocker =- 15dbm (antenna port input power) a blocker 1 95.0 mhz -115 dbm blocker 2 1652.5 mhz -114 dbm blocker 3 3590.0 mhz -110 dbm blocker 4 5337.5 mhz -116 dbm
8 august 05, 2013 b8088 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = 25 ?c ant terminating impedance: z ant =50 w || 3.9nh. rx terminating impedance: z rx = 100 w( balanced)|| 12nh. tx terminating impedance: z tx =50 w characteristics tx-rx min. typ. @ 25?c max. differential mode isolation a 1710.0 ... 1785.0 mhz 53 58 db 1805.0 ... 1880.0 mhz 50 53 db common mode isolation 1710.0 ... 1785.0 mhz 50 57 db
9 august 05, 2013 b8088 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. maximum ratings storage temperature range t stg C40 / +85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115b (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses v esd 300 2) 2) acc. to jesd22-a114f (human body model), 1 negative & 1 positive pulse. v human body model, 1 pulse input power at p in 1710.0 ... 1785.0 mhz 29 dbm continuous wave t = 55?c, 5.000 h elsewhere 10 dbm }
10 august 05, 2013 b8088 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-ant frequency response tx-ant (wideband)
11 august 05, 2013 b8088 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response rx-ant frequency response rx-ant (wideband)
12 august 05, 2013 b8088 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-rx (differential mode) frequency response tx-rx (differential mode, wideband)
13 august 05, 2013 b8088 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-rx (common mode) frequency response common mode rejection ration
14 august 05, 2013 b8088 1747.5 / 1842.5 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet vswr at tx-, rx- and antenna
15 august 05, 2013 b8088 1747.5 / 1842.5 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. references type b8088 ordering code B39182B8088P810 marking and package c61157-a8-a64 packaging f61074-v8247-z0000 date codes l_1126 s-parameters b8088_nb_un.s4p, b8088_wb_un.s4p see file header for pin/port assignment. soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2013. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
16 august 05, 2013 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks. t he following applies to all products named in this publication: 1 . some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2 . we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3 . the warnings, cautions and product-speci?c notes must be observed. 4 . in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5 . we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6 . unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7 . the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks. t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39182B8088P810

	To Download B39182B8088P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .